Recent content by Ralph123

Almost all the glitches are fixed. Now when I start it the green seat bar light doesn't want to light up. The temperature warning light goes on and then the temperature gage goes into the red very quickly. It will do this a few times but then it cools down and everything runs fine. Bob Cat...

I think it is all fixed. I ran into a Bob Cat mechanic today. Unplugged the controller for the right handle and the code changed from 12-23 to 12-22 and the machine works fine. Have to turn the key on and off a couple times to get the start station working and once in 4 hours it said hot engine...

OK, I am slowly getting smarter. No more error codes. 11-05 I fixed by temporarily gluing a seat bar sensor together so it wont move. 12-23 I fixed by taking the auxiliary hydraulic fuse out. Now it still locks up. Warning light comes on that says engine coolant out of range but it goes again...

OK. Finally got some time to work on my bobcat. Got the seat bar sensor problem fixed. With all the spare parts I had I glued one set together and hooked it up and it works perfect. No more error codes. NOW guess I had a 2 part problem because the machine still locks up. All lights on board go...

I have been playing with the exact same problem for over a year. Alignment problem is the key and although everything has been changed I think the same thing is being overlooked that I did. There is a little plastic piece with a plastic key moulded in. Finally bought the 10 buck part and it is...

OK, after checking every wire in the Bobcat I finally took off the ground wires off the battery post and cut them shorter. Cleaned them all off and put di electric grease on them after twisting them all together. Put a metal connecter on the end and hammered it as tight as possible. Re installed...

I have a 763 and I am not a mechanic so don't know if the 2 machines are similar BUT I have been playing with mine for a couple months to get all the kinks out. Mine has 2 positive wires off of the battery and the smaller lead goes to a fuse that says "little fuse 100 mega". Mine was doing the...

So which one would you think I should start with? Is there anyway to test them before changing each one?

Sorry Bob Cat Dan, Didn't see your post before I posted more info. Talked to the Bobcat dealer and he thinks it is a sensor issue too. Unplugged what I thought was the Hydraulic Sensor and got error code 05-22 but machine still ran. It stalled again so I limped it into the shop. Unplugged other...

More info but no solution. Cleaned off the rad and cooling fins for the hydraulic oil. Lots of crap on the rad, mostly hay and tiny rocks. Still acting up. It does it right off the start sometimes when the rad is still cool. Checked the hydraulic oil after it shut itself off for hydraulic oil...

Lots of air moving. Almost blows me over when I am beside the machine. Can also feel it sucking through the rad. So, where do I go from here?

Sorry Dan, I am not sure how to even get to the cooling fan. Pretty sure I know where the shrowd that covers it is but that is about it.

So fixed the seat bar sensor. Now the coolant temperature light comes on and the hot Hydraulic oil light comes on and shuts down the machine. Weird thing is that sometimes it does it when the machine has only been running for a few minutes and sometimes not until running for an hour or so. Added...

Ignore this post. Everything seems to be working 110%. Coolant level was a bit low and kept saying hot coolant. Topped it up and it took a while but engine cooled down and now no error codes and no stalling. Will let it sit again till it cools right down and start again but things are looking...

I have a Bobcat 763G. Have changed the battery, terminals, cables, seat bar sensor etc. Now it still locks up. Lights on start station all go off and Bobcat stops. Hydraulics don't work and no forward or reverse. Seat bar light comes back on immediately and you push the start button and...