New profile posts

Help Support SkidSteer Forum:

Dealership replaced the o-rings and seals in the spool valve lift tilt on my 2002 773 turbo and it's still leaking, only when it's cold. When it warms up it stops leaking. It has 2030 hrs. Does anyone know how I can get a copy of the service manual?
R
Robanybody
You can get a copy from Bobcat but prepare to give them a kidney for it. There are several people on Ebay that sell manuals, either printed or on a thumb drive. I bought a thumb drive and took it to the local copy shop and they printed it and bound it pretty cheap.
What is the part number of the $55 part you ordered to correct your brake switch issue on your Ghel 2054?
hi mate. i am having the same problem with my s650 as you did with the dash lights staying on and wont start. did you ever find out the problem with yours
J
Jrmass
I ultimately ended up replacing the control module to clear the alarms. I chased every fuse and wire and it was the only thing that made sense. It fixed the issue, but there is still a gremlin that will lock the parking brake when starting. My machine always started in my scenario. I just could never get the parking brake to release. Hope this helps.
J
Jrmass
As said, the control module did fix my issue 99.9% of the time. It has only locked up three or four times since the C.M. replacement. Before that, it was nearly a worthless machine.
Still working the old 720 bobcat. Is there a source for parts to add aux hyd to one of these and what controls it? I have the middle pedal, but no lines to the front or other controls.
J
John23
Loader parts source,good hydrauluc guys,they do tons of boncat pumps etc
I'm having trouble with the auxiliary controls on my 2000 753G I may be interested in your right hand control handle if I figure out that that is my problem.
Hopefully there are 3 pdf files attached to this that you'll find very interesting. While I don't have any exact experience with this symptom you're thought that it is in the servo area is very logical and would be my first choice. I'd also take a close look at the plate shown in figure 83 on page 29-48 and it's mating surfaces just in case something weird is going on there. Good luck.

Attachments

  • img005.pdf
    3.4 MB · Views: 7
  • img006.pdf
    2.6 MB · Views: 3
  • img007.pdf
    6.1 MB · Views: 6
did you have any success getting manuals for the 825? i know this is many years later....i just purchased the same machine and i am looking for all the manuals as well. thanks.
G
guitarmam 1969
Hello I'm new to the forum. I have a s450 want to hook up and after market cab heater. Can't find where to hook up hoses.Can someone help?
hi

see that you have same machine like mine (your looks a bit better shape;))

is it possible for you to send me picture how in your machine looks V-belts? do you have one or two?
also appreciate if you could send me diameter of each wheel

in my machine previous owners put a lot of "own ideas" and now i'm trying to bring it back to original shape

thank you in advanced for your reply

Kind regards
/Dawid
Hello Firefighter. I noticed you where able to attach a file to a past post. Any chance I could get the hydraulics pic and parts number pages? I recently purchased a 440 and am struggling with finding parts. Have a couple of leaks. Both bucket rams are also leaking. Any help is greatly appreciated.
Hi Chris. New member to this forum proud owner of a 440 Bobcat. I am interested in a copy of the operating manual. would very much appreciate a copy. Thank You!
743 Bobcat hour meter.
I'm getting power at the ground side of the hydraulic switch under seat when key is on or when it's running. I don't know where this power is coming from. Need ground there to complete circuit for hour meter to work.
I have a 2004 S-175 bobcat it won't lift but it will tilt I switched the valves and replaced solenoid ....the lift pedal doesn't move at all no lift. Any Idea's
P
polishpete
even when u swtiched sounds like pefal linkage messef
If you don't mind me asking, what answers did you get from your Glow Plug Relay error E005324-04:

I've run into the same error code on my T550 and switched out the relay, fuse, and checked all wiring as best I could and can not find an issue.
New guy looking for info on 1975 Bobcat 720. Am currently working on ignition that failed yesterday and want to find info on the possibility of installing aux hydraulics. It has a center pedal but no lined to the arm or hoses. Will post some pictures later when the sun gets warmer in Western Montana.
Top