Problem with Hopping

[wingnut1]

I'm new to skid steer repairs, but can fix most anything. When i run my t200 around picking brush and dumping I have no problems. But when I start pushing on something it really starts hopping/jerking to the point if I don t just let go of the controls my head might just pop off my neck. What is usually the problem or fix?

 

[Fishfiles]

Are you rollers still round , the rear roller of the T200 will first start to look like a hex stop sign and then like a sprocket , are your tracks adjusted properly

 

[wingnut1]

Are you rollers still round , the rear roller of the T200 will first start to look like a hex stop sign and then like a sprocket , are your tracks adjusted properly

It seems to be a hydrostat problem. Its not a track ratcheting problem.

 

[wingnut1]

It seems to be a hydrostat problem. Its not a track ratcheting problem.

Figured it out. Opened up the cab and found the hyd filter loose and the left conyrol shock was bad. $40 later and digging in the dirt again.

 

[Tazza]

Figured it out. Opened up the cab and found the hyd filter loose and the left conyrol shock was bad. $40 later and digging in the dirt again.

Glad it was something simple!