Problem with Hopping

Help Support SkidSteer Forum:

wingnut1

Member
Joined
Jun 24, 2007
Messages
9
I'm new to skid steer repairs, but can fix most anything. When i run my t200 around picking brush and dumping I have no problems. But when I start pushing on something it really starts hopping/jerking to the point if I don t just let go of the controls my head might just pop off my neck. What is usually the problem or fix?
 

Fishfiles

Well-known member
Joined
Feb 8, 2007
Messages
1,698
Are you rollers still round , the rear roller of the T200 will first start to look like a hex stop sign and then like a sprocket , are your tracks adjusted properly
 
OP
OP
W

wingnut1

Member
Joined
Jun 24, 2007
Messages
9
Are you rollers still round , the rear roller of the T200 will first start to look like a hex stop sign and then like a sprocket , are your tracks adjusted properly
It seems to be a hydrostat problem. Its not a track ratcheting problem.
 
Top