I have a 250 jd started it to put it onThe trailer the guy didn't set the parking brake before he stopped or shut the key off went to start it back up and it wouldn't start wouldn't even crank the parking brake light is on seat belt light is on and battery light is on. Now I get no work lights, fuel pump nothing just dash lights the parking brake switch is in the lock position seat belt is locked and seat sensor . The first time he tried to start it it made a clicking sound and that's it the battery is fully charged I'm getting juice to the key. I called my local dealer and they are not sure and there field truck is backed up for the next month
Help Support SkidSteer Forum:
Theyre both tight and clean good connection
skidsteer.ca
Well-known member
- Joined
- Jan 20, 2006
- Messages
- 3,853
Do you have a copy of the service manual?
If not one is available here
http://www.mediafire.com/?l22595v2mp03t
Trace the power flow in the schmatic then grab you test light and find out where the power quits flowing at on your loader.
Skidsteer.ca
