HI I have the 14-c it has a plate that the seat sits on 4 or 6 bolts it lift off giving you access to the top of hydraulics & all hoses if yours dosn' t have this plate than every thing comes out the back of the machine. I hope this is of some help
Hi camaro If you dont get a manual from anyone I could make copys of my manual and send to you I live near Grand Rapids mi. e-mail [email protected] p.s. hope your not in a hurry I am in fl. till end of March Tom
Hi Tom I think that model was made by hydra-mac & they put ATF in there's. there are breather's on the top of each gear box take them out with I think a 9/16 wrench & a dipstick will be attached.but someone may ahve changed it to sae30 or tractor trans fluid. Good luck.
Hi I have 14-c and my manual calls for automatic transmission fluid (dextron) check the color befour you add any. I changed mine over to a tractor hyd trans. fluid from tractor supply. TOM
It takes speical tools & you would have a hard time getting parts check with pump rebuilder before you take it off I am not familiar with your engine some have timing marks you should line up before removing.
this is a all gear drive unit it could have water in the gear box and freeze the gears up.I dont know where you are located but there is a place in Iowa called Hackert sales. parts & service. web hackertsales.com
Hi I have one of those old units 14-c. I have had very good luck with these folks. Hackert sales & service Inc 12864 Hwy.F-62 E. Sully,Iowa 50251 Ph. 641-594-3777 The linkage is an easy adjustment take the metal panel off that the seat sits on & the linkage is right there if you dont have a...
sorry to hear about your bad luck I think all of us have been in that boat once or twice. I saw a couple of these engines on e-bay one was Item # 220759702751
hi bob i dont know if you have tried these folks but i had good luck with them. hackert sales & service 12864 hwy. f-64 e sully iowa 50251 ph.641-594-3777