I need to replace both U-Joints in my 1845C. Anybody know the size I need? I'd like to get them from a local NAPA or other try to save a buck. The ones I have removed have 151 cast into them, but I am having no luck searching that number. They also have USA cast in. Doubt I'll be able to find...
I am in process of rebuilding an old 1845C. One of the issues is the instrument panel doesn't fully work. It seems that some functions work but others don't. So I took it apart for inspection. Found one red led rattling around in the housing. That's easy enough to figure out and replace. But in...
Well I thought I'd report back. The tool worked perfectly well. Took a lot of turning to get to the right place TDC, but that is just a case of the flywheel diameter and short room for the ratchet movement. The other part of the tool in the link did not work at all. The disk is too large to...
Received the tool. Seems to work as expected. I didn't have time to actually remove the IP, but I did put the tool in and make sure that it did engage and turn the flywheel. It did. Very good help. Just thought I'd give thanks and confirmation in case someone else is looking for the same. Cheers.
Thanks Phil314, I had not found that particular item but I have found others similar. I did not see any that list the Cummins 4-390 engine. So are you saying that the 4-390 is a 5.9L? Great find if it will work.
Looks like I have to pull my injector pump out of my 1845C. To do that I need the Engine Turning Tool, and the tool that presses the shaft out of the gear. Anybody want to sell one? Suggestions where to buy one?
I'm finishing a major overhaul on my 1835. As long as I have had it torn down I figure I can do some of the long delayed improvements that have been waiting. So my 1835 has the Case 188 Diesel with Roosa Master DB injection pump. It is originally equipped with a kill cable, and a key switch. I...
I have had a heater in my 1835 for many years. Wouldn't be without it. Mine is in the 3/4 inch heater hose. Heats the engine and starts even in the coldest weather.
Hello group. I have a Case 1835. Owned this machine for more years than I can remember. Can't imagine being without it. So several years ago I was told of a suggestion from Case to install an electric fuel pump. Which I did. It has worked very well. Improved starting and seems to have helped...