Recent content by rich414

i have a s300, i had a short in the fan switch, then the machine would not start. bobcat dealer could not find the issue causing the 34-04 message. before i let the dealer loose replacing parts, does anyone have a fix for the 34-04 issue???? wiring harness? right or left control panel?

i have a 2010? s300 bobcat

same issue what was the solution??????. I did have a short in the fan switch on the side panel which is when the 34-04 issue came about

I have a 2008 s300 bobcat 1600hrs on the unit ,high flow, gold package, turbo'd , 2 speed. When in 2nd speed going up a slight grade 1-2% with VTS tracks on or a steeper grade with tires on the machine surges, kind of like lunges. The hand throttle pinned at 2450 rpms, you can give it 100%...

does anyone have a link to a downloadable shop manual for an s300?

thanks for the advise the dealer said that the cab had to be lifted, move some hydraulics so that a chain inspection plate could be removed, then remove a bolt in the chain area and remove a snap ring and slide the complete hub and shaft out, replace the seal and put the POS back together...When...

I have an s300 2008 with SJC the older version with OUT the square box under the handle. Well the controllers went out 2 days before the warrantee expired, this invoice was $2500....I was glad that I bought the extender warrantee I agree that the machines have too many wires and computers!

does anyone out there have a s300 service/shop manual. I have to change out the right rear axle seal as oil is leaking out of axle onto rim. thanks

which machine, s300 or s330 they are ~$50k the S330 is about $1k more. both machines are just off the asembly line, so I hope that they have the latest upgrades.. your coments are appricated!

Iowa Dave, thanks for the reply. Is the "S" model being discontinued? I agree with you that they will delay the larger "M" models! I live in a small town, andthe only dealer within 300miles, they have no old inventory to move, yet they have located a few 330 and 300 that have over 360days on the...

there is 1250 hrs on the machine and engine, I am also getting black smokw out the exhaust and a film layer inside the motor area, that you can wipe your finger across and get a dirty finger, and clean area where you wifed. thks for the help!

Which should I buy S300 or s330 or M series which will not be out until fall of this year (maybe) they currently have the S650 which has 74hp. I need more HP! I am a little sacred to buy a new product line the first or second year of production. YOUR THOUGHT are appricated!! R.

Last week, I spent 8 hours blowing snow, ran the machine a 90% throttle, then put it away for the evening, the next morning there was a 5" puddle of oil on the ground directly uunder the valve cover drain/vent hose. THis has never happen before? any idea what is causing this? thanks R.