Recent content by clydesdale

I planned to go with the D-ring type set up. But, it sounds like I would have to unbolt the D ring to remove the attachment. The new M- series bobcats have a similar device, but the D-ring is held in place with a pin. So, the whole thing can be removed quickly. I wonder if I can fab up something...

I am trying to see if anybody came up with a good way of keeping the hoses off of the tires. Do they make a hose guide or something? Thanks.

The hex plug in the reservoir won't loosen. I have attached a breaker bar and the plastic tank flexes. I am afraid of breaking it. Anybody run into this before? Advice? Thanks.

Hi All, When I hit "run", I can hear a relay click under the seat, but no beep and the pad does not come alive. I then hit "stop" and I hear a click under the seat again. I can hit "run", get the click and no action and then hit the start button and the machine will run for a few seconds. I keep...

I went to start my skid steer and I received this code, M4304. It appears to be a communication error with the panel. But, I could still hit the start button and it started and then stalled. I then went to start it again and it did not have the code. I used the machine for a bit and then let it...

I am looking to purchase a breaker. Any idea how Indeco breakers are? Thanks.

I have an s150 with about 860 hours. I am thinking of buying a rock hammer. I have some annoying ledge on my property and a couple pieces right in the lawn. There is an HB880 nearby for sale. I mentioned the idea to someone today and they said that a hammer will tear the hell out of the machine...

I purchased the Camso 753 tires and the tools to break them down and install them. I am very pleased with the traction. The machine is much more usable now.

Hi guys and gals, I can use some help purchasing mats to protect my lawn and driveway edge. I have some stumps in the lawn that I want to remove with my backhoe attachment and my s150 skid steer. Can anybody make a suggestion on what and where to purchase. Thanks.

ok, thank you. I was originally looking for another "power king" tire. But, I spoke with them and they discontinued the particular "new" tire that I have. So, it will always be an odd ball. So, I will just get 4 new ones and I am leaning towards the Camso SKS 753. There are not a whole lot of...

Ok, thanks. I may purchase one of those cheetah tanks to quickly inflate the tire and seat the bead. How do you guys feel about camso Brand Tires? I may go for the sks 753 tires.

I have one brand new tire that came as a spare. It is a "power king" and I am considering purchasing 3 more and replacing the tires myself. I have watched some youtube videos and it looks like people are able to de-bead and re-bead the tires using tire spoons. Any thoughts on doing this myself...

We got it working fine!! Just in time for snow. So, here is what happened. The 5 amp fuse for "switched" was blown. I purchased a service manual for $7 in PDF form. The dealer wanted $161. My brother is great at reading schematics and he tracked down the short using the wiring diagrams. We had...

Anybody know where the ground straps are?

I imagine it is not the big fuse or relay that is in the wiring harness in the engine compartment, the master fuse. The HVAC works and I can start the motor and it will run for 2 seconds. The left and right side panels are not lighting up. Especially the left side computer panel. Are there any...