Recent content by bobo

I have been a little creative in the past with broken bolts and such and if you have a steady hand you could weld a nut on whats left and and it will come out....just don't be too agressive with it....nice and slow....it will come out.

Hi guys The ford engine in my 632 threw a rod yesterday...not much left.Question,i'm not happy with the gas engine and would like to install a diesel.Can anyone recommend a good model # Kubota that I could swap in? Second..is there any hidden things that I should be aware of.I am aware that...

Well its time to pull the engine out of my 632,The question i have is are there any manufacturing companys out there that can supply overhaul kits for 1.6 liter ford engine.I'm not doing very well on this end but maybe you guys may have more information.Thanks

Hey guys....My 632 with the ford engine has become more and more difficult to start,so i decided to pull the carb off and do a rebuild on the thing.When i removed it there is some sort of a electronic solenoid on the back of the fuel bowl.Dose anyone hav an idea what the function of this...

I was wondering that also.What I came up with was a motorcycle horn that I spliced into my temperature sending unit,as I only have a light.So now if it should ever get too hot it will trip the horn and then troubleshoot the problem.

The covers that you are talking about are the covers to protect your drive motors.I would not suggest jacking at those point as that will surely damage your machine.

Just a question....what would be involved in filling the tires with fluid.To my understanding its some kind of sodium solution?Can a tire shop perform this?

I had bought the machine with the weight underneath.I have'nt seen any machines with this setup.The owner before me used the machine in wet sand....i guess that stuff can be very heavy.Thanks

Hi guys,just wondering if the counter weights came with the 632 or are they an option. also do they come in different weights.Thanks

Can i ask what oil you use in your chain cases?Thanks BoBo

Hey thanks guys it dose make sence now,as I was wondering how to check the level.The reason I wanted this distributor number was for a conversion kit to electronic.I found this website, its WWW.pertronix.com.I downloaded a copy for my files for future use.There is probably alot of guys out there...

Hi guys,I have more questions...would anyone be able to give a number off the distributor so that i may try and track down a pointless/electronic system?I suppose that I could take mine out but don't have timing light for the install....help?What is the point gap on this ford eng.My last...

Thanks guys....I guess that I'm old school...I learned something today.On another note,here in Winterpeg,Manitoba our weather can get pretty cold.My machine is parked in the garage but it takes along time to fire this thing up when its cold.....is this normal?New plugs,points and yet it will...

Hey guys,Just bought this 632 and still trying to work out the bugs in this thing.Ok this is the deal,repalced the alt and put in a new battery.The wiring on the back of the alt has seen better days.....rotten/cracked, broken wires.I'm looking at this thing and see a wiring harness thats for the...

Thanks Tazza, Is there anything special that would be helpful when pulling the engine out....will something fall out that i should be aware of? Is the shaft solid or a slipyoke.Dose it only go back in one way?I know...sooo many questions.Thanks BoBo.