30 bobcat auger

Help Support SkidSteer Forum:

triad

Well-known member
Joined
Nov 10, 2007
Messages
65
Has any body ever made the swivel bracket for one of these? I have some ideas but the more the better. How about a root bucket....steel thickness etc.? Thanks Steve
 

sterlclan

Well-known member
Joined
May 1, 2004
Messages
528
I made a root bucket used 3/8 plate and the swivel like a swivel socket?there are pics of the bucket in the media section...Jeff
 
OP
OP
T

triad

Well-known member
Joined
Nov 10, 2007
Messages
65
I made a root bucket used 3/8 plate and the swivel like a swivel socket?there are pics of the bucket in the media section...Jeff
pivot bracket is the correct wording I guess....between the motor and bobtach to keep the auger plum..BC dealer wants $409 for it and $50 for the two pins.....Thanks
 

farmboy55

Well-known member
Joined
Aug 16, 2006
Messages
324
pivot bracket is the correct wording I guess....between the motor and bobtach to keep the auger plum..BC dealer wants $409 for it and $50 for the two pins.....Thanks
I just went and purchase some 2 X 2 thich wall square tube and drill a hole at each end. When you drill the first end turn the tube to the next side for the other end. Pretty simple
 
OP
OP
T

triad

Well-known member
Joined
Nov 10, 2007
Messages
65
I just went and purchase some 2 X 2 thich wall square tube and drill a hole at each end. When you drill the first end turn the tube to the next side for the other end. Pretty simple
Thanks farmboy, I didn't think 2x2 would hold up but I will take your word for it. Steve
 
Top