I have owned Bobcat equipment for 20 years,Seven (7) different models.(all preowned) I speced out and purchased a new and probably one of the last 863's to go down the line,along with ten (10) new attachments. It is now two (2) years old. It has 900 hrs. on it now. It is equipped with every option but the fancy computer starting system. This machine has been nothing but trouble since it was delivered to me. The Dealer is the WORST, They have done nothing. I could list all the problems I have had with this machine but that would take a long time. Here is the latest that happend this morning. If any of you out there can help, Before it suddenly catches on fire. I would be very very greatfull. Machine started and ran fine for two (2) hours moving and grading crushed concrete. I stopped the machine and was out of it for 10 mintues. Got back in went to start it and every light,warning signal or what ever they are called on both left and right sides blink very fast,fuel & temp gauges go up & down and all that happens is a click that sounds like it is coming from the starter. (this is starter#3) The code reads "input" when I ran the test by pushing the light button for 5 seconds, It does also read 88888 then goes out. ANY IDEAS??