PT 100 wont start

[Jeff3624]

i have only had this machine a couple months now and it has 131 hours on it. Started it today and no problems, ran it for an hour or so and now it wont start. i had this issue last week with it but then i acted fine. i have checked everythign i can think of. Got juice to starter and all fuses are ok. When i turn over the key and check the volts on the starter nothing is coming through. i dont want to jump it with a screw driver but not sure what else to do. Any ideas? I was thinking maybe ignition switch but kind of lost on this

 

[gtstang462002]

Do you have the powered quick attach option? If so make sure the switch is in the lock position.

 

[Jeff3624]

Do you have the powered quick attach option? If so make sure the switch is in the lock position.

yes i do but it starts runs fine then wont start without touching anything

 

[Jeff3624]

yes i do but it starts runs fine then wont start without touching anything

ignition switch just fine any ideas?

 

[Tazza]

ignition switch just fine any ideas?

You say it won't start, it will not fire or it will not even crank?

 

[Jeff3624]

You say it won't start, it will not fire or it will not even crank?

Thanks for all the help but i figured it out finally. A bad relay.