hammerman07
New member
- Joined
- Jan 19, 2013
- Messages
- 1
New guy to the site! Last week i went to start my JD 250 skidsteer and instantly the ignition fuse blew. I looked over the wiring behind the upper cluster to find 2 wires to the ignition had got hot. thought because of the rain we had been having maybe moisture was the problem. i found this site and a few threads that were close to my problem but none exact so after much research and a post i read here i disconected as many connections i could. put a new fuse in and started plugging things back in. found that the wiring to the first (front)relay of the 3 relays was my problem. tried to find wiring diagram but every time i tried a link to download one it wanted to download a bunch of other crap with it so i called a couple dealers to find out what the wires went to. Godfroy brothers in JonesVille MI was willing to help me out over the phone. tech told me it was wiring to the fuel cut off solinoid. he told me to try unpluging the temp sensor by the upper radiatior hose on the top of the engine and try to start it. And away it went! started right up! Dont know exactly what the temp sensor has to do with starting it but it will be a lot cheaper fix than originaly thought. Just wanted to post my problem in case someone else has the same problem and needs a few ideas on how to find a solution to their situation. thanks to this site and the tech at Godfroy Bros. in Jonesville MI. for gettting me back up and running without emptying my wallet!!!!!