Hooking up a 3 hose Power Broom to a bobcat.

[darkostoj]

Hey guys, just bought some equipment and i'm scratching my head trying to figure out how to put it all together. I bought the broom at auction, and I didn't get any paperwork or manuals and the company isn't responding to me so I'm not sure how to proceed. It is a TMG BR72 angle broom.and it has 3 hoses on it with no quick connect ends. From what I understand one of the hoses is a case drain? My old bobcat only had 2 hoses on it, but the new 2013 S590 has 3 hoses on it. Is the smaller of the 2 for the case drain? I just want to make sure I set this up right.

Thanks!

 

[flyerdan]

A quick nose-about indicates that John Deere uses the same number for "their" broom, so it would seem reasonable to assume that diagrams and manuals should be the same for both.
Maybe try perusing sites like 777 Parts or Green Part Store to see if the parts diagrams sort it.

 

[[email protected]]

A quick nose-about indicates that John Deere uses the same number for "their" broom, so it would seem reasonable to assume that diagrams and manuals should be the same for both.
Maybe try perusing sites like 777 Parts or Green Part Store to see if the parts diagrams sort it.

the smallest one should be a case drain. the bigger 2 will work either way you hook them up but obviously forward and reverse hoses you prefer