Hi all, spent the summer in my free time refurbishing an 825. Its now together and running well. But I have 2 issues. 1. the motor in the machine is a 4.108 Perkins. The valve cover gasket needs to be changed. The gasket is available through Bobcat which I bought. the two grommet type seals that the two hold down bolts go through are not available. I dont want to change the gasket without doing the grommets. Where can I get these? The 2nd issue is I need an axle seal replaced. I got too close to the seal when I was pressure washing the machine and I believe that the seal got cut /torn. What can I expect to pay to have the seal replaced? thanks Steve A.