Axle seals on 763

[Johnboy]

Was wanting to know how big of a job it is to replace the front axle seals on a Bobcat 763. I am pretty well mechanically incline and work on my equipment on my farm. TIA

 

[Tazza]

As long as the issue is not your bearings, seals are easy.

Loosen the axle bolt a few turns, put a bottle jack or two behind the hub, pump them up and smack the bolt with a big hammer, it will pop the taper on the axle.

Drill a small hole and use a self tapping screw into the seal and pull it out. Install the new seal and put the axle back on. Ensure not to lube the taper, it needs to be dry to do the job.

 

[brdgbldr]

Was wanting to know how big of a job it is to replace the front axle seals on a Bobcat 763. I am pretty well mechanically incline and work on my equipment on my farm. TIA

Here is a video of an S160 seal replacement. Different model but same procedure.

 

[Tazza]

That is how i did mine.