Recent content by xcmark

my suggestion is to find a differnt insurance company, My skidsteer is insured and cost $650 per year for theft on a blanket pollicy for the machine and attachments at a stated value of $25,000. and no requirements of locator or track device.

Can any one give me a idea of what a 84" heavy duty GP bucket will run me from your local dealer ? Everything attachments .com is where I was looking to buy one , they are just under $1400 for a exduty. I dont want a litter or snow bucket that I cant use for gradeing and keep in mind my machine...

does it have a return line back to the tank for fuel ? if it does pull it off with it running to see how much fuel is returning. could be a screen in a fitting on the inlet side of the fuel system getting loaded with crap ? Have you blown air back threw the fuel pick up lines back to the tank ...

Anyone have any input on a bobcat 8811 backhoe , I am looking to see how stron they are and if there is any problems with them. I found one used and considering buying it , I am guessing it has 10~15 hours on it tops! both buckets the owner has still have sharp cutting edges and most of the...

I would guess if it was white smoke you have a injector popit stuck open and dripping fuel in. Its not uncommon for equipment that sits with water in the fuel to have this issue. Hit it with a good dose of fuel additive/system cleaner . Power service in the white bottle at walmart or something...

forks will work better for stumps. Put the forks about 8" apart , point them down and drive then in and tilt to snap roots. Do that a few times around the base it will make much less mess of the area. Dont expect to grab a 20" wide stump and get that out , your S130 has limitations. have fun ...

try getting Bars leak pellets , take 3~4 of them and crush them into a powder and add them to the cooling system slowly with it running. Put the cap on and run it for a while . Its has fixed a few things for me doing this. Dont use the bars leak in the liquid form , I have has as good of...

I have a perkins 1004 in my JCB skid steer that is a 92 hp turbo motor that is hard starting. It has a fresh interstate group 31 , good battery cables and clean connections. I have check the cables for hot spots after cranking it for 10 seconds , tried putting the charger on it 15 mins before...

I have a perkins 1004 in my JCB skid steer that is a 92 hp turbo motor that is hard starting. It has a fresh interstate group 31 , good battery cables and clean connections. I have check the cables for hot spots after cranking it for 10 seconds , tried putting the charger on it 15 mins before...

welcome to the republic of Cambridge........ Suprised they dont site to operator for noise! For those of you who are not from this area the city put a ban on transfats about 2~3 years ago , nothing could be sold in the city if it had transfats on the box lable.

Sales tax paid ? if it is just get a plate and orange triangle. For about $600 you can insure it .

track loader will be better in soft ground. Plowing the driveway if its got any grade to it your going to need chains or studs in the tires or tracks for sure. Maxgrip is screw in stud for tires/tracks I think it should solve that problem. Keep in mind a set of new tires and a set of steel...

the loader arm is a NON- issue , that fact is that every other skid steer has 2 arms (most are about the same size). On my 1110t the arm can be up 5' off the ground and I still see over it to the right and the left side door is never a problem seeing. It pushes like a dozer , lifts huge loads...

Ken , thank you for taking the time to post a reply! I have worked in construction for 25+years I agree , nothing is unbreakable. Any owners have a eagle tallen grapple ? Can you back drag with the lower tines be as long as they are I question if you roll the bucket enough to get the top of the...

I have a JCB 1110t CTL , its 10,300 lbs that runs on 18" wide tracks with 92 hp. I will be useing this machine to clear a 3 AC lot of land that doesnt have many large trees. Mostly what is on the lot is 3" ~ 14" trees (a few evergreens mostly maple, birch and some elm trees) . The machine is...