Recent content by BobcatMatt

Is is normal to be able to lift the motor about 1/2" or so up and down? I just replaced a bad mount and was.checking things out when I noticed the motor moves up and down on both rear mounts when I lift up with a pry bar. This normal? There's only one way to.put then mounts together from what I...

I have 1 Solidear track for I believe a T-180 / T-190. t180 t190 I can check the measure ments if you'd like. I have 2 mini ex tracks, That are almost new, less than 8 hours on them. I no longer have the machine, so these must go $650 for BOTH. Call, don't email I have two t-300 / t-250 tracks...

Bobcat 853 mid 90's model. 3,xxx hrs. Has an enclosed cab (no heat or ac). Machine could use a paint job, but if your like me, I felt it doesn't have to be pretty to make money... I have a tooth bucket and smooth bucket, which is negotiable in the price. I have all reciepts for work done, it has...

I need a set of arms for an 853... Whats a price and location...?

I was wondering because I need to get a tooth bucket for the machine. I will be mainly be just tearing up ground and movin the dirt around with it. 72 too big?

I have a 1991ish Bobcat 853. What size bucket should this machine have on it? The bucket that is on it is too small now that I flipped the wheels around (i think now they are they way there supposed to be).... So what size bucket will cover the width of my 853 now...? what about an 863?

I have an 853... around 1993....F series Is what I believe they called them. I need a door please let me know if anyone has one. Thanks!!!!

1. The machine will not move until the sticks are pushed out pretty far. How do I adjust this? 2. he machine pulls to the right , where do I need to adjust this? 3. Parking brake is out of adjustment, but there are no more threads left to adjust... will stacking washers up fix this? 4. The...

well its not the lines. What else could it be ? A transmission seal?

Turned out to be the starter solenoid.

recently had the same problem with my 843. Turned out to be one of the hoses leading up to the lift cylinder was leaking. get some good degreaser and brake clean and clean the shit out of the hoses, connections etc. Make sure everything is tight. Clean off the threads if you have to and...

I noticed the other day that right under the "transmission" (the piece the u-joint locks onto) There is fluid underneath it. There are some steel tubes running under it but they do not seem to be rubbing. bad seal? any ideas?

Put the motor back in after having to replace fan, shroud, filters, gaskets etc. Started it up no problems. I came back the next day and It wont do anything . The key was in the off position, the battery is not dead. you turn the key once and you can hear the solenoid click. but nothing after...

Bobcat 843... Everytime you lift the arms up, the bucket leaks down in postion with the raising of the arms. At first I thought it was some sort of leveling system, however even if the bucket is tilted down, it will still lower when the arms are raised. However ,you can still tilt the bucket...