zeffy0
New member
- Joined
- Nov 8, 2014
- Messages
- 4
I have a brand new T650 with 100 hours on it. Working with it today. Had grapple lifted up in air and machine died. Hydraulic system malfunction symbol came up but no code. Fluid glass read empty so I added hydraulic fluid thinking it was low but didn't help. I can start the machine back up but it beeps a few times at 30 seconds exactly and shuts down. I had to pull the hydraulic release handle to get out of machine. At first the machine wouldn't idle up but it will now. But the machine will not move. Once the arms came back down from pulling the release valve the hydraulic glass read all the way full so I don't know if it was low to begin with or not. I feel like even if it was low the machine would have indicated that with a code before any potential pump failure. Please please help.