Replace light bulbs in 4-way flasher without changing entire assembly?

[ylsf]

Hello all,
Noticed one of the flasher/signal lights on S220 is out. We had added a kit for the flasher/signals and lasted a while but now that one if burnt out was looking at it closer and seems like a sealed unit and meant to be completely replaced. A replacement one is almost $90 Canadian so was wondering if anyone has had luck cracking these cases on these things open and replacing just the internal bulb and sealing back up with silicon or whatever?

Looks like this:

https://shop.bobcat.com/ca/4-way-flasher-light-6517516?srsltid=AfmBOoohEEe1Z32eEPyTGx1fxOvgZjxwOH-sM2C21nNfixu4HVS5TZDe

 

[laurencen]

as you state cost in Canadian check out Greggs, they have lots of styles, here is one

Grote 4" DOUBLE FACED LAMP

Grote 4

greggdistributors.ca

 

[ylsf]

as you state cost in Canadian check out Greggs, they have lots of styles, here is one

Grote 4" DOUBLE FACED LAMP

Grote 4

greggdistributors.ca

Great, thanks for the link, haven't heard of them before. Will see if I can find an orange one from them and check pricing.

 

[Topper1]

Pretty much any truck shop, or Gregg's, napa, traction, fort Garry industries. They will all have access to grote, which aren't a cheap brand regardless.

 

[laurencen]

Pretty much any truck shop, or Gregg's, napa, traction, fort Garry industries. They will all have access to grote, which aren't a cheap brand regardless.

they are way cheaper than the Bobcat dealer, changed my lights out on the toolcat couple years ago saved lots of money and they are LED now