New K-series Track loaders

[wvtrees]

Go to Bobcat.com and check the changes. Not too severe. Added roller. Improved air flow thru engine. Increased hydralics. Increase reach.

 

[Tigerotor77W]

I made a similar thread (earlier) on another page; http://www.skidsteerforum.com/DesktopDefault.aspx?tabid=54&frmView=ShowPost&PostID=1312
but this one here, posted by wvtrees, is probably a good place to start for new CTL introductions.

If anyone can explain to me how Bobcat increased hinge pin height to 128.8" from 126.4":
1) without increasing overall machine length, and
2) without increasing total machine height with arms raised,
I'd be appreciative...

 

[siduramaxde]

I made a similar thread (earlier) on another page; http://www.skidsteerforum.com/DesktopDefault.aspx?tabid=54&frmView=ShowPost&PostID=1312
but this one here, posted by wvtrees, is probably a good place to start for new CTL introductions.

If anyone can explain to me how Bobcat increased hinge pin height to 128.8" from 126.4":
1) without increasing overall machine length, and
2) without increasing total machine height with arms raised,
I'd be appreciative...

maybe moved the chassis mounting point of the lift cyclinder back further and I would say that they just used longer lift cyclinders?????

 

[Tigerotor77W]

maybe moved the chassis mounting point of the lift cyclinder back further and I would say that they just used longer lift cyclinders?????

No idea. A Bobcat salesman wasn't sure about it, either...