New K-series Track loaders

Help Support SkidSteer Forum:

wvtrees

Member
Joined
Dec 10, 2005
Messages
20
Go to Bobcat.com and check the changes. Not too severe. Added roller. Improved air flow thru engine. Increased hydralics. Increase reach.
 

Tigerotor77W

Well-known member
Joined
Apr 29, 2004
Messages
268
I made a similar thread (earlier) on another page; http://www.skidsteerforum.com/DesktopDefault.aspx?tabid=54&frmView=ShowPost&PostID=1312
but this one here, posted by wvtrees, is probably a good place to start for new CTL introductions.

If anyone can explain to me how Bobcat increased hinge pin height to 128.8" from 126.4":
1) without increasing overall machine length, and
2) without increasing total machine height with arms raised,
I'd be appreciative...
 

siduramaxde

Well-known member
Joined
Nov 15, 2005
Messages
362
I made a similar thread (earlier) on another page; http://www.skidsteerforum.com/DesktopDefault.aspx?tabid=54&frmView=ShowPost&PostID=1312
but this one here, posted by wvtrees, is probably a good place to start for new CTL introductions.

If anyone can explain to me how Bobcat increased hinge pin height to 128.8" from 126.4":
1) without increasing overall machine length, and
2) without increasing total machine height with arms raised,
I'd be appreciative...
maybe moved the chassis mounting point of the lift cyclinder back further and I would say that they just used longer lift cyclinders?????
 
Top