Mustang 1200 many questions.

[bigcam]

Hi Bigcam I just sent you a email about the PDF then decided I should join , woot. Glad to be on here. Tim Alberta, Canada

It has been many years but i am still replying to emails as i said i would. Al though i don't reply real fast some times. Life gets busy and that email is no longer my main used email anymore so i don't check it as often. But i still do. It was so much easier when the link would stay working on the site haha
I will post a link here again and see how long it lasts. When it fails just email me. I did gain some other manuals for the 1700 as well because of some nice helpful folks emailing them to me.
1200 https://www.dropbox.com/s/uir0dnycbcsot4y/OW-O-1200%20NO%20PASSWORD.pdf?dl=0
1700 https://www.dropbox.com/s/pzwh8fm86r1zspu/FO-S-ENG%20104%20Mustange%201700.pdf?dl=0
https://www.dropbox.com/s/rkbgmjexjyjynfr/OW%201700%20JD-S-TM1075%20JD170.pdf?dl=0
https://www.dropbox.com/s/4s3pfk8j4zx2qbl/FordV4.0%20Mustang%201700.pdf?dl=0

 

[bigcam]

It has been many years but i am still replying to emails as i said i would. Al though i don't reply real fast some times. Life gets busy and that email is no longer my main used email anymore so i don't check it as often. But i still do. It was so much easier when the link would stay working on the site haha
I will post a link here again and see how long it lasts. When it fails just email me. I did gain some other manuals for the 1700 as well because of some nice helpful folks emailing them to me.
1200 https://www.dropbox.com/s/uir0dnycbcsot4y/OW-O-1200%20NO%20PASSWORD.pdf?dl=0
1700 https://www.dropbox.com/s/pzwh8fm86r1zspu/FO-S-ENG%20104%20Mustange%201700.pdf?dl=0
https://www.dropbox.com/s/rkbgmjexjyjynfr/OW%201700%20JD-S-TM1075%20JD170.pdf?dl=0
https://www.dropbox.com/s/4s3pfk8j4zx2qbl/FordV4.0%20Mustang%201700.pdf?dl=0

I tried separating them links but the forum put them all together There are 4 separate links there. https is the start of each link. Im not sure how to keep them separated?

 

[flyerdan]

I tried separating them links but the forum put them all together There are 4 separate links there. https is the start of each link. Im not sure how to keep them separated?

I put in the linefeeds for you and went ahead and parsed the links while I was at it.

 

[Npence]

Well no one responded but i now have some answers to my own questions and will post it so the next guy searching can find it to help them. The Hydraulic filter is next to the battery at the front of the machine. Napa part number for the hydraulic filter is 1567 So far never found a Free manual for this machine but ordered one. Far as hydralic oil goes i found on this machine where it says to use Type A transmission fluid. I did some searching for more popular brands of machines like the bobcat 600 and 610. They claim the same oil as this but it seems many people claim they get away with any type of oil even 10-30 engine oil. Others say Dextron. so go search similer machines and see what you feel is right. I guess i will find my self some Type A transmission fluid and spend the big bucks buying it just to be sure. I will try to post other good info as i come across it just to help others. Don't worry bumping a old thread Because i have it setup to email me of any replys and mite still be around to help the next guy.

Did u ever find a manual?

 

[Npence]

Hello i just bought a mustang at auction. 1200 owatanna. Do you by chance have any specs or info like the belts and hydraulic diagrams?

 

[T-rustyfix]

Hello i just bought a mustang at auction. 1200 owatanna. Do you by chance have any specs or info like the belts and hydraulic diagrams?

Npence,

Did you get your info? My OMC 1200 has been in the family for 45 years. I may be able to help.

 

[campbellfarms1]

Npence,

Did you get your info? My OMC 1200 has been in the family for 45 years. I may be able to help.

T-rustyfix,
I'm looking for the info as well. Do you know a replacement belt available part number?
Thanks

 

[FungusAmongUs]

Looks like this is the one. https://www.vbeltguys.com/products/mustang-020-26433-equivalent-variable-speed-belt

 

[FungusAmongUs]

I actually just ordered this one for $41.52 shipped with a 10% code (VBG10) https://www.vbeltguys.com/products/...riable-speed-belt?_pos=2&_sid=7445b58df&_ss=r
Does anyone happen to have a copy of the parts manual?

 

[must tang]

Well no one responded but i now have some answers to my own questions and will post it so the next guy searching can find it to help them. The Hydraulic filter is next to the battery at the front of the machine. Napa part number for the hydraulic filter is 1567 So far never found a Free manual for this machine but ordered one. Far as hydralic oil goes i found on this machine where it says to use Type A transmission fluid. I did some searching for more popular brands of machines like the bobcat 600 and 610. They claim the same oil as this but it seems many people claim they get away with any type of oil even 10-30 engine oil. Others say Dextron. so go search similer machines and see what you feel is right. I guess i will find my self some Type A transmission fluid and spend the big bucks buying it just to be sure. I will try to post other good info as i come across it just to help others. Don't worry bumping a old thread Because i have it setup to email me of any replys and mite still be around to help the next guy.

I just bought a mustang 1200 and am looking for similar info on this machine. I also need to replace the belt on mine. Would you happen to have a part number for a replacement?

 

[wooddude]

Well no one responded but i now have some answers to my own questions and will post it so the next guy searching can find it to help them. The Hydraulic filter is next to the battery at the front of the machine. Napa part number for the hydraulic filter is 1567 So far never found a Free manual for this machine but ordered one. Far as hydralic oil goes i found on this machine where it says to use Type A transmission fluid. I did some searching for more popular brands of machines like the bobcat 600 and 610. They claim the same oil as this but it seems many people claim they get away with any type of oil even 10-30 engine oil. Others say Dextron. so go search similer machines and see what you feel is right. I guess i will find my self some Type A transmission fluid and spend the big bucks buying it just to be sure. I will try to post other good info as i come across it just to help others. Don't worry bumping a old thread Because i have it setup to email me of any replys and mite still be around to help the next guy.

Thanks as im about to buy the same machine

 

[T-rustyfix]

This is what I got to have ready in case I break or wear out my belt. I haven't installed it yet. It is the correct width, but not as thick as the original (about 5/8" vs 1"), but it shouldn't matter.

D&D PowerDrive 131693-H95180-2926V686 Reeves Pulley Corp Replacement Belt, VS, 1 -Band, 68.599999999999994" Length, Rubber https://a.co/d/iPlejUy

 

[harleymech66]

Even though we didn't have answers for you, it is appreciated that you took the time to pass on what you found out.
I'd like to think that standard engine oil would do the job, but i simply don't know for sure. If it is a clutch drive, it needs the ATF, but if it is hydraulic/hydrostatic i see no reason why engine oil/hydraulic oil wouldn't work as long as they were thick enough. The pumps were designed to pump hydraulic oil, so i see no reason why you can't use the same.

I just found your post. It does take type a fluid, equivalent is standard dextron 3. I have not found any free manuals. The factory did not produce a service manual. I am working on the variable speed drive.

 

[T-rustyfix]

I just found your post. It does take type a fluid, equivalent is standard dextron 3. I have not found any free manuals. The factory did not produce a service manual. I am working on the variable speed drive.

How's the variable drive project going?

 

[harleymech66]

How's the variable drive project going?

Slow, I think i know how most of it works. Trying to track down parts. Do you know a source?

 

[T-rustyfix]

Slow, I think i know how most of it works. Trying to track down parts. Do you know a source?

Yes, I may have a source. What do you need?

 

[T-rustyfix]

I have rebuilt and reinforced my entire drive belt system. There is a parts machine I know of. Post some pics of where you are and we might be able to help.