Hello m600mike........Good to see you took my advice and joined the forum. Also not surprising to see old machinist was right there with a solution. From reading this forum it has been my experience that he knows what he is at. Old Machinist hopefully you or some one else can help........I just posted "600m vs 610m" ????? Cheers........khal [email protected]Manuals are here.
http://www.mediafire.com/?sharekey=31fe914bdce0f590ab1eab3e9fa335ca838046c5c09959e7
thanks old machinist! and ya seems to be good thanks cal!Manuals are here.
http://www.mediafire.com/?sharekey=31fe914bdce0f590ab1eab3e9fa335ca838046c5c09959e7