Eric ls285b
New member
- Joined
- Jan 21, 2023
- Messages
- 1
I have a blown motor, and don't know how to release hydraulic pressure or how to make wheels turn
Help Support SkidSteer Forum:
Attached is what I found in my L185 op manual. Pretty sure the LS185B is the same setup. The park brakes are in the back of each of the hydrostat motors. They are released with hydraulic pressure. And there are bypass valves on the pumps--that would be the easy part.
I could think of ways to do it, but they're all a lot of work.
We drug & pushed one onto and off a roll back one time--broke the winch cable too.
No real good answer. They weigh about 7000 if you look to lift it.
You gonna rebuild/replace the motor?
I could think of ways to do it, but they're all a lot of work.
We drug & pushed one onto and off a roll back one time--broke the winch cable too.
No real good answer. They weigh about 7000 if you look to lift it.
You gonna rebuild/replace the motor?
