L218 quit

[forsale]

Made the jump from an old bobcat 743 to a 2011 L218 about 2 weeks ago. It has 3100 hours on the machine but less than 500 hours on the engine. Haven't used it much yet. I was just using it and it completely shut down. There's a diamond with an exclamation point in it on the display, and an error code 3402 shows up. Didn't come with a manual so I'm hoping someone here can help. The dealer won't be open till Monday so I'm on my own till then.

 

[Mike10]

Cause:​

Instrument Cluster has sensed an open circuit condition in the Fuel Solenoid circuit. (The fault is only activated when Ignition is On, Fuel Solenoid Commanded State is high, and Fuel Solenoid Status is low.)​

Possible failure modes:​

1. Open wire in circuit.
2. Failure of Fuel Solenoid.​

3. Instrument Cluster has internal failure.

 

[forsale]

Cause:
Instrument Cluster has sensed an open circuit condition in the Fuel Solenoid circuit. (The fault is only activated when Ignition is On, Fuel Solenoid Commanded State is high, and Fuel Solenoid Status is low.)
Possible failure modes:
1. Open wire in circuit.
2. Failure of Fuel Solenoid.
3. Instrument Cluster has internal failure.

Thanks for the reply! I called the dealer this morning and happened to get the lead mechanic who stopped by there. He came right out (about 25 miles) and picked it up. They are fixing it right away Monday morning at no charge. Thanks again Mike!