kohl_cytre
Member
- Joined
- Sep 1, 2012
- Messages
- 23
Hello Everyone, My name is Kohl and I'm new here. I've been checking out all the threads on the forum and I've been enjoying all the tips and help everyone has been passing around. I was hoping someone might be able to help me out with a problem. I recently purchased a Scat Trax 1350. I bought it knowing it did not run and today has been the first opportunity I've had to start troubleshooting it. It has a Kubota v1902 4 cyl. diesel. It turns over but does not start. This is what I've tried so far today. 1- Check for fuel flow out of the tank. Good flow. 2- Checked for fuel flow out of the filter assembly. Good flow and was replaced by the previous owner recently. 3- Checked the mechanical fuel pump for operation. No flow during a turn over cycle. The pump has an arm on the side which I'm assuming is for manual priming. I disconnected both the inlet and outlet tube. Placed the inlet tube into a cup of diesel and pumped the manual lever. No flow what so ever. I'm thinking that should of worked for flow. Also what is the outlet psi on these pumps? I'll be replacing all fuel hose soon as it's getting really brittle. I'm hoping I'm on the right track just need a little help. Thank you!!