Electrical problem

Help Support SkidSteer Forum:

Skel

Member
Joined
Jul 10, 2012
Messages
8
I'm trying to figure out why my 6675 won't run for more than 5 seconds when in Run mode....but will run forever with the controls locked in Service mode. Any ideas? Can anyone email my a copy of the electrical diagrams. I've checked all the fuses and looked for any obvious wiring faults with no luck so far. Thanks,
 
OP
OP
S

Skel

Member
Joined
Jul 10, 2012
Messages
8
Found the problem! Was a bad start interlock relay. strange thing is that the relay tested ok on the bench...buthad a bad connecton when engine vibration was involved. Cost me $54 from the dealer, and I'm back in business!
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,840
Found the problem! Was a bad start interlock relay. strange thing is that the relay tested ok on the bench...buthad a bad connecton when engine vibration was involved. Cost me $54 from the dealer, and I'm back in business!
You did well finding it. Something so small causing all those issues.
 
Top