CT322 Not Starting

Help Support SkidSteer Forum:

DR Buck

New member
Joined
Apr 26, 2022
Messages
2
I have a CT322 that will not start. It was running fine and I finished and shut it off. Then when I went out a few days later it will not start. Battery is fully charged. There is no clicking or starter engagement. It acts like a safety interlock is open. I don't know which indicators have switches that prevent starting. What's weird I get the cab door indicator lit on the panel but I don't have a cab door and the machine never had one. The seatbelt and seat indicator go out when I sit down and engage the seat belt. Parking brake and hydraulics are also set correctly.

Any ideas???
 
Last edited:

CBCSkidsteer

Member
Joined
Nov 3, 2017
Messages
8
Take them out to lookout them carefully and test with a ohm meter. That area can get water in it over time and cause some starting issues and periodic shut off issues.
 
Top