I have a small pinhole leak in the hose that runs from the oil cooler to a "T" fitting on the restrictor valve. It leaks about 1 to 2 quarts an hour during use. The line is a charge pressure line. The leak is in a clear section of hose about 18 inches long. Easy to get to. The problem is on the end by the "T" fitting. I believe I will have to pull the engine to get to it. Do they make a consumer installable connector that can be installed in the line if I cut it at the leak? I was told there is a fitting available somewhere that is inserted into each end of the cut hose and held in place by clamps with bolts. Anyone familiar with these connectors? This machine is just used for light duty and not commercial use.
Thanks
Thanks