Hey guys, proud owner of a 99 863G with a duetz engine. I think the problem is either with the seat bar sensor, or the computer itself. When I put the seat bar down, nothing happens, and hitting the green operate button doesn't do anything anymore. If I hit the traction lock overide button, I can drive around, but I am still locked out of the lift and tilt functions. Other details are, I am getting 7.5 volts at each of the wires going into the plug for the lapbar sensor, and the third wire is a ground. Also, the computer is not showing code 11-16 which according to the service manual should be triggered when the sensor is unplugged. Very frustrating here, any ideas?