S300 Tilt and lift issue. Looking for some help!!

Help Support SkidSteer Forum:

Kmill91

New member
Joined
Jan 2, 2025
Messages
1
Hey all, trying out this forum for some insight to a problem I'm having with one of our skid steers.

2009 S300. Bobcats are not my forte. Skid steers in general really aren't. My focus is all Sennebogen material handlers so I don't have much experience or literature on these little guys.

So the tilt, lift and auxiliary functions all stopped working about 95%. If you rev the machine up almost full throttle they'll start to work but not well. This is acting like a bad pump in my opinion.

Curious if this is a common issue with these and what people have found.

Any input would be much appreciated.

Thank you!!!
 
Could be a bad pump, but with some luck you may just have a bad bypass valve. If the valve is stuck open then you won't get full pressure to the hydraulics.
 
Top