We have a 2000 Case 85xt. This machine is smack dab in the middle of the model changes and i have a hard time with getting answers at the local case dealer sometimes without hauling it into them. The last major item i fixed was the drive bolts all sheared off and had to pull the transom pump. Had it rebuilt, and pressure tested then installed. While apart we fixed some worn wires in the cab in the main loom that runs up by your left foot. This is this weeks issue....! A few weeks later the lift side of the hydraulics started to have issues. Going up slowly at first, now it will barely raise unless you push it all the way out. We found out if we are sitting in one spot we can press the electric brake button on the hand controller and it will work a little better. ( which to me seems completely wrong but works ).... We are looking for more worn wires while we have it tore down putting injectors in it. Has anyone ever had this issue and was it hydraulic or an electrical problem? Thank you for any guidance we can get.
