843 bobcat bucket works until warms up

[demunck21]

Did you check and set relief pressure after installing the the pump. Very important step.

Where and how do u reset the valve I think it is on the front left side of pump but u have to have a gauge right

 

[Bobcatdan]

Where and how do u reset the valve I think it is on the front left side of pump but u have to have a gauge right

The relief vavle is on the control vavle. You check pressure threw the aux couplers on the front. It would be best to reference the correct manual for the machine for the correct location of the relief on the control vavle. As for what spec pressure is, I'd guess 3,000 psi, but I don't know for sure off the top of my head.

 

[demunck21]

The relief vavle is on the control vavle. You check pressure threw the aux couplers on the front. It would be best to reference the correct manual for the machine for the correct location of the relief on the control vavle. As for what spec pressure is, I'd guess 3,000 psi, but I don't know for sure off the top of my head.

Ok I will do that thanks for the information

 

[demunck21]

Ok I will do that thanks for the information

Ok I got a manual for it the relief valve is not where the book says it is I checked the pressure it about 1500 at full throttle I can't seem to find the relief valve