Mar 31, 2012 #2 F Fryboy1 New member Joined Mar 31, 2012 Messages 1 Needing to replace wheel bearings and just wanted to double check. Regular threads on hub to axle nut.
Needing to replace wheel bearings and just wanted to double check. Regular threads on hub to axle nut.
Apr 1, 2012 #3 T Tazza Moderator Staff member Joined Dec 7, 2004 Messages 16,839 Yep, standard threads, just done up really tight. They should even have loctite on them.
Apr 1, 2012 #4 7 7LBSSMALLIE Well-known member Joined Feb 2, 2012 Messages 1,294 Tazza said: Yep, standard threads, just done up really tight. They should even have loctite on them. Click to expand... you shold be aware that brgs require ax removal. spocket etc speedy sleeve is avail
Tazza said: Yep, standard threads, just done up really tight. They should even have loctite on them. Click to expand... you shold be aware that brgs require ax removal. spocket etc speedy sleeve is avail
Apr 9, 2022 #4 3 38chevro Member Joined Apr 9, 2022 Messages 6 Tazza said: Yep, standard threads, just done up really tight. They should even have loctite on them. Click to expand... How do you get them loose,what size impact,thanks
Tazza said: Yep, standard threads, just done up really tight. They should even have loctite on them. Click to expand... How do you get them loose,what size impact,thanks
Apr 9, 2022 #5 3 38chevro Member Joined Apr 9, 2022 Messages 6 38chevro said: How do you get them loose,what size impact,thanks Click to expand... How do you get The Hub nuts loose what size impact do you need thank you
38chevro said: How do you get them loose,what size impact,thanks Click to expand... How do you get The Hub nuts loose what size impact do you need thank you
Apr 12, 2022 #6 S SirThadious Member Joined Feb 16, 2018 Messages 11 I used a 3/4" drive IR impact gun to remove mine. Either 600 or 800 ft/lbs depending on the bolt length.
I used a 3/4" drive IR impact gun to remove mine. Either 600 or 800 ft/lbs depending on the bolt length.
Apr 12, 2022 #7 3 38chevro Member Joined Apr 9, 2022 Messages 6 SirThadious said: I used a 3/4" drive IR impact gun to remove mine. Either 600 or 800 ft/lbs depending on the bolt length. Click to expand... Thanks
SirThadious said: I used a 3/4" drive IR impact gun to remove mine. Either 600 or 800 ft/lbs depending on the bolt length. Click to expand... Thanks
