My drive motor on the right side of my skid steer came apart. I bought a new rotating unit and installed it. I checked the drive pump for any obstructions and I dug the remains of the previous owners bearing failure out of the chain case.
Everything is back together but the right side will not drive. The left side will drive forwards and backwards.
I took off the chain case covers and the left side doesn't show any oil flying around when the motor is idling and the left stick pushed back and forth.
The right side has a steady stream of oil coming from a hole in the drive motor. The hole is there from the factory. Its a perfectly drilled round hole.
Anyone know what I'm dealing with here? I can't find anything in the manual.
Everything is back together but the right side will not drive. The left side will drive forwards and backwards.
I took off the chain case covers and the left side doesn't show any oil flying around when the motor is idling and the left stick pushed back and forth.
The right side has a steady stream of oil coming from a hole in the drive motor. The hole is there from the factory. Its a perfectly drilled round hole.
Anyone know what I'm dealing with here? I can't find anything in the manual.