262c right side will not go when cold

Help Support SkidSteer Forum:

sdkiefer

New member
Joined
Jan 17, 2012
Messages
1
I have an intermitten problem with my 262c. Every once in a while after I start the machine, the hydraulics on the right side do not work. My left side engages, but the right will not go in forward or reverse. It seems I have to let the machine warm up for 10-15 minutes and all of a sudden the right side engages. Anybody have any ideas? Thanks
 

Treekiller66

Active member
Joined
Dec 22, 2010
Messages
42
I have the same problem. Been going on for 2 years or so and in the summer above 75 or so it has no problems what so ever. I had it in several different dealers and re calibrated the stick replaced speed sensors and nothing has changed. I have just spoke to a tech and his best guess is that there is a valve sticking in a valve body somewhere. If it isn't showing a alert on the panel they think it would be a mechanical problem not a electrical one. If you can find something out let me know been messing with this for to long and hate to give them the OK to stick a 2 thousand dollar valve body in for nothing.
 

Latest posts

Top