So I have figured out the issue with my machine. I had pinch a wire for the door latch safety switch. Found a 5A "Swithched" fuse was blown and replaced it. Still the same. The machine would start by pressing the Run and Start at the same time but nothing on the screen and would only run for about 10 seconds. Found that did some power checks in the fuse block and found there was no power on one side of that fuse. Cleaned up the inside of the fuse blade terminal and that solved the problem. Learned that it is always best to start with simple power checks and go from there. Hope this helps anyone with the same issue.View attachment 4526View attachment 4527