2 more done Bale Spike / 6 ft Boom

[1ofU]

I'm down to one more project left , a Grapple Bucket then i think i should be covered on my attachment needs . i did a bale spike and a 6 ft boom , going to pull the motor out of the donor forklift with the boom .
1 of U

 

[1ofU]

 

[Tazza]

Nice, that looks like something you would see in the old mad max movies looks nice and dangerous for the hay bails
What size material did you use for the mount to the machine? must be sturdy to handle the force that the spikes would put on it.

 

[1ofU]

Nice, that looks like something you would see in the old mad max movies looks nice and dangerous for the hay bails
What size material did you use for the mount to the machine? must be sturdy to handle the force that the spikes would put on it.

on all of the attachment i been making i used the same base to mount ,
it a 24 inch liner that we would pour bridge beams on ,
24X48X1/4 with 3 # 5 inch full length channel on the back fully welded
as needed .
i used for the top rear mount 1/2X2X14 on the bottom 1/2X2 1/2 X14 with 1/4 X3 straps to box end the bottom base runner .
1 of U
Jess