I need some help!
I have a 1998 863F with AHC.
The left (LIFT) controller has 2 LED lights that stay solid normally.
Everything works Lift Up, Lift Down, and Tilt Up.
Tilt down and the right LED light goes off. It doesn't blink or show an error; it just goes off but comes back on when the TILT controller goes back to a neutral position.
With the machine off, I can hear the actuators engage as I move all the controls except Tilt Down. No sound from the actuator and the right LED light goes off.
I switched the plugs on the actuators and the LIFT (left-hand) controller works the TILT actuator up and down. The TILT (right-hand) controller works the LIFT actuator UP but not Down.
I assumed this meant the actuators were good as the issue persisted with the same controller. I thought my issue was a bad AHC sensor in the TILT (right-hand) controller. part 6684910.
I plugged this new part in and had the same issues.
Now I'm at a loss what could the be issue. Any help would be appreciated.
I have a 1998 863F with AHC.
The left (LIFT) controller has 2 LED lights that stay solid normally.
Everything works Lift Up, Lift Down, and Tilt Up.
Tilt down and the right LED light goes off. It doesn't blink or show an error; it just goes off but comes back on when the TILT controller goes back to a neutral position.
With the machine off, I can hear the actuators engage as I move all the controls except Tilt Down. No sound from the actuator and the right LED light goes off.
I switched the plugs on the actuators and the LIFT (left-hand) controller works the TILT actuator up and down. The TILT (right-hand) controller works the LIFT actuator UP but not Down.
I assumed this meant the actuators were good as the issue persisted with the same controller. I thought my issue was a bad AHC sensor in the TILT (right-hand) controller. part 6684910.
I plugged this new part in and had the same issues.
Now I'm at a loss what could the be issue. Any help would be appreciated.