Recent content by redbarn

thanks just a few more questions, the control valve is still in the bobcat and the piston or spool? is connected to a rod going to the foot petals, i can unhook the rod take off the cap, pull out the spool and replace the o rings .. will anything else fall out of this... sorry for all the...

hi my 440b has a leak at the control valve piston . I have never had this apart , it has two allen head bolts on what appears to be a cover. if i pull this off is there o rings for seals ? do i need special seals. i do not have a manual for this machine.. thanks paul

Thanks i pulled the engine, of course my cherry picker is 80 miles away so i had to lift it out manually. this was a great chance to clean 10 years of dirt and oil... went to carquest and got a b-47 belt. put everything back in went to get exhaust gaskets from local fleet store they only had...

Thanks for all the help. i went to carquest and got a B-47 belt 50" long. i save a lot of money....

anyone have any info on a three satr B-47 belt, this is for a bobcat 440B with akohler 18 magnum engine.... thanks or a cross reference for a belt... it looks like a pretty hefty belt....

well i tried everything i could think of... i dug into it and pulled the engine.... it sure needs a good cleaning .. iam also looking for a b-47 belt i think it says three star on it / any advise on this belt... thanks

i have a 440b with a 18 kohler. it died after it has ran a while let it sit then restarted i ended up changing the magneto...

Hi, i have a bobcat 440 B that does not engage the starter, i turn the key to the start position and i hear a click at the solenoid. i tried to jump the solenoid and no responce from the starter. so far i have also changed the battery cable [+ ] and recharged the battery. i put in another...

Hi, i have a older Bobcat 440B with a 18 kohler magnum engine, i noticed the hydraulic belt is showing some wear and tear, i also noticed that there is only about a 1/4 or mabey 1/2 inch space between the pulley bolt and the side of the frame. not enough to slip the belt through. do i dare...

i also have a older 440B with a 18 magnum kohler engine. it sounds like you are doing the right things with the oil , plugs ect... i have used mine for just about everything you can imagine from general hobby farm work to digging a trench for water well lines.. i have had mine 10+ years and only...

Hi, i have a bobcat 440b and am looking for a place [other than bobcat dealer] to purchace the drive belt. it is a mbl three stars B-47. or any cross reference for this belt... thanks

I checked for spark after it quit and it did not have any. i checked it again a couple of hours later and it had spark? It is a kohler 16.5 hp engine. the year is a 1985 model, i am not familiar with this type of engine. It looks like it has a magneto? I am not sure about any sensors, as i do...

I have 440b with a kohler gas engine, after running it about 20 minutes it suddenly dies. I let it sit overnight then it starts right up. what is causing this? thanks

Hi, my bobcat 440b keeps blowing the fuse, i have looked for a short by can not find anything, does anyone have a wireing schematic for this machine,, thanks for any help...