Recent content by Mike763

Hi Guys I was wondering if anyone can give some advice? I need to quote a job to Excavate 100' X 120' X 12" Depth. I need to remove the sod on top and then Loam and Clay underneath. The total is 444 cubic yards I am thinking roughly 40 Tandem loads. I usually work by the hour so I am not sure...

I checked My receipt, there was no information about the flow test. The mechanic told me everything passed the test. My receipt said I was suppose to get a print out of the results, which I didn't. I will call bobcat on monday and find out if they tested everything. I Have put about 20 hrs on...

I took my 763 in to bobcat to have the neutral and linkage adjusted. I also had a flow test done, they said everything was good. Now my machine seems to really wine When I turn. when I push the right hand control it sounds like a valve is open and its leaking. The machine still seems to work Ok...

Thanks for the advice, the fan blower pulley was seased up. So I took it all a part, what a fun job that was. I had to Drain my Hydraullic tank and remove it in order to get the fan gearbox out. Plus I can only get the top up so high in my Garage so that makes it even worse. When I seperated the...

I have a 1999 Bobcat 763, I Havent had any Problems until tonight. It Started to squeel really bad and started to smell like something was burning. I turned it off looked in the back, everything looked fine. I started it back up with then RPMs low and after about 10 seconds the squeel and the...

I Have a 9" and a 12" bit and I Keep them in the back of my truck. I get tired of them rolling around all the time. I would also like to have them locked up some how so they don't get stollen. I was just curious what everybody else does with theirs?

Yes it is ashpalt that it that it jumps the worst. Sometimes it jumps on other surfaces but never on any soft surfaces where there is not as much traction. is there better tires i could buy or do i just have to live with it.

It sounds like its your Hydraulic Preasure Light. Was your Machine Warmed Up when this happened? Is yor Hydraulic fluid low?

I am running 10 - 16.5 Bobcat Heavy Duty Tires with bead Guard. The tire Preasure Is 45 Psi.

Can anyone tell me why my bobcat 763 jumps while turning on Pavenent? I have to turn really slowly so that it Doesn't jump. The only time it Doesn't jump is when I Have no Bucket on. would apppreciate any input. Thanks Mike