Recent content by hilltopdude

1994 753 Bobcat..When I push the right hand control arm forward, it must be push all the way to get the machine to go. When I pull it back there is no problem with the machine moving..Sometimes while pushing if forward it will like catch and jerk the machine. Is this a bad part or is it more...

Sorry!!, just shows how pissed I was last night... its a 753. 1996

Cannot for the life of me find the other end of the hose that goes from the left side of the cooler back into the cab. It shows in my maintenance manual schematic that it goes down to the hydraulic control unit. It comes off the left side (looking at it from the back) of the cooler and goes...

Really thankful for your reply. I did get the coolant bottle out and the hose replaced.. found another leak in the hose that goes from the hydraulic filter to the big pump. got the end off the filter housing, and am still trying to figure out how to get to the other end of the hose. the hose is...

I have a 1994 753. The hose on the Right side of the machine as you look at it from the rear, that goes up thru the arm is leaking.. Is there any trick to getting this hose off. I have tried for two days(I am no mechanic) to get a wrench on the fitting, with no luck.. I know this is old hat to...

Yes it looked like a waterfall coming out of the shroud. Both the radiator and the cooler did look wet but the compartment didn't have alot of fluid in it. Will hold the cooler up and start the machine tonight and see if blows the fluid out. New cooler is 185.70 at the dealer.

753 started blowing hyd fluid out the sides from the fan port. when I opened up the back fluid was coming from the fan shroud. Machine still able to steer and raise bucett. Pulled up the cab, and am not sure how to access the fan.