Recent content by Fabric8r

Help Support SkidSteer Forum:

  1. F

    New Holland LS190 Wont Start out of safety mode??

    I Got it running, unfortunatly im not 100% sure what it was. But im thinking it was Dirty or loose fuse in the fuse box on top of the cab. I took all fuses out and cleaned it up with electrical contact cleaner and it is working. I also unpluged seat and seat belt switch and re pluged them in...
  2. F

    New Holland LS190 Wont Start out of safety mode??

    Sorry Its A LS190. i cant figure out how to edit post.
  3. F

    New Holland LS190 Wont Start out of safety mode??

    Need Help figuring out Non start problem. I was using the skidsteer for a little while. its ben running fine. im guessing i did to much bouncing around in it. I shut it off. then it wouldnt start back up. it just made a click noise and would not crank. after looking around. I noticed a pinch...
  4. F

    Motor Swap " Thinking outside the box "

    im not by my machine right now. I do know the sticker that is on the motor is torn & hard to read. The motor is a Iveco 3 cyl... i found another motor the same with this info on it... NEF TC = CNH SSL Tier 2 LS 175 and Case equivilant. 58 kW at 2300 rpm TC and 310 NM at 1400 rpm. Turbo...
  5. F

    Motor Swap " Thinking outside the box "

    Sorry guys. i had spacing, Indented paragraphs, and it seperated. but it didnt post that way. do you know why?
  6. F

    Motor Swap " Thinking outside the box "

    Wow Thanks for the reply and info guys. Im not much of a diesel pro. but im learning here. hear is a link to a good video on HP vs Torque http://www.youtube.com/watch?v=APSfpcdgFKs Yes by the looks and what you guys have said. Diesel motors produce alot more Torque in lower rpms around 2,300...
  7. F

    Motor Swap " Thinking outside the box "

    I just looked up some specs on both motors. Although the honda motor has way more HP. the torque is much lower. Im thinking this will be a problem. am I correct here?... Stock motor 77hp @ 2,300. rpm.... 228 lb/ft ( torque ) @ 1400 rpm Honda motor 170 @ 7,600. rpm.... 128 lb/ft ( torque ) @ 6200 rpm
  8. F

    Motor Swap " Thinking outside the box "

    Hello. I dont think this is a brand specific question. I have a 2005 new holland Ls 185.b skid loader. its had alot of fire damage. i just took in the Injector pump to have it rebuilt and to my dissapointment its gonna be in upwords of 2,500. " thats rediculous in my opinion." What im wondering...
  9. F

    ???'s How to release the BRAKES

    Hello Problem solved. Yes it has a hydraulic brake that is spring loaded. when the power is lost the brake automaticly applies. What i did was Got a big red hydraulic hand pump and connected it with a Tee to both drive motors. there are two small lines tword bottom of motors that are for the...
  10. F

    ???'s How to release the BRAKES

    I have disconnected all the hoses to the motors. and wheels are still locked up. I believe on this model it is a push button parking brake? not 100% sure though. there is a soenoid with a hydraulic hose running to the drive motors. Im wondering if there needs to be some sort of pressure to the...
  11. F

    Burnt ls185.b How to identify to order correct Part #'s

    Hello i Baught a New holland Ls 185.b I need to order lots of parts. how do i know what part #'s ill need to order?... I think its a standard cab. i was told the delux cabs have Controlls on the sides as well. mine doesnt. I see from the service manual i downloaded there are still 2 options for...
  12. F

    I Need *** PARTS *** ? Where 2 get GOOD DEALS

    And no i dont have a contractors licence or buisness name. "I'm Private" so i dont think setting up an account will work.
  13. F

    I Need *** PARTS *** ? Where 2 get GOOD DEALS

    Hello I have a New holland Ls185.b< has Fire damage i am in need of lots of parts would like to know if i could by wholesale anywhare or who offers good prices. Thanks for your Help.
  14. F

    ???'s How to release the BRAKES

    Hello I just baught a New holland LS185.b that has had fire damage most controls wires and engine parts have ben burnt. I need to move it around. Any idea how i go about releasing the brakes so i can pull it around. Thanks in advanc,e Scott
Top