Recent content by edwardo

Help Support SkidSteer Forum:

  1. E

    trailer brakes

    Thanks,the problem is fixed.I found a wire under the dash that was damaged when a previous owned installed an alarm system...
  2. E

    trailer brakes

    OK.i have found that its a problem with the truck wiring...for some reason the wire coming off the brake light switch has 8 volts when it should have none,this is causing the brake controller to apply the brakes.Also my brake lights won't come on,must be a short somewhere.
  3. E

    trailer brakes

    Hey guys,i have not used my trailer in a long time.I hooked it up today and when i went to move ahead the brakes were locked on.I spent a bit of time trying to figure it out but it was raining hard so i will try again tomorrow. First off,all the lights work properly only the brakes are...
  4. E

    frustrating tire tread

    i've used a wood working router to regroove tires before.It worked very well,but the rubber underneath was pretty thin after.
  5. E

    best attachment

    If you could only have one attachment,what would it be?
  6. E

    testing coolant

    what kind of coolant tester do i use to check the freezing level of the newer bobcat coolant.All the testers i've looked at are for ethylene glycol.
  7. E

    72" Tooth Bucket

    looks good.whats the price going to be?
  8. E

    coolant

    the machine is 2003 and has 500hrs on it.how many years is the factory coolant good for?
  9. E

    coolant

    I was looking at the coolant in my bobcat today and noticed that its not green,its more of an orange color.Does bobcat use different colored stuff or should i drain it.
  10. E

    bucket float

    ok thanks alot.
  11. E

    bucket float

    I have a s150 and I can't seem to make the bucket float.According to the manual in it I put the bucket down and push one of the switches on the left control(standard controls).It doesn't seem to do anything,am I doing something wrong?
  12. E

    tooth bar or bucket?

    I need to get a bucket with teeth for digging.A bucket with teeth welded on is going to cost me around $1000.The other option is bolting in a tooth bar when I need it but i'm not sure what one costs or if it would work well.
  13. E

    need help chaining to trailer

    thanks for the help guys.
  14. E

    need help chaining to trailer

    Thanks for your help.Does anyone know the canadian laws regarding this?
  15. E

    need help chaining to trailer

    HI, newbee here,I just picked up a s150 and need some advice on attaching it to a trailer.could somebody please post a picture?
See more
Top