I set the heater up the same way my buddies older 743 is set up, besides maybe the direction of flow as previously mentioned. The heater install in the PDF file you gave is for a WAY more complicated heater than the heater I have, yet the hose connections are similar - the t fittings involved...
I hooked one hose directly off of the water pump and the other directly off of the rad intake directly above the water pump, the only locations on the machine that made any sense. The machine was running for several minutes, and maintained normal operating temperatures, so if flow is a problem...
Everything is hooked up. I ran it when finished with the door off as soon as I got done today. At normal operating temp, this thing blows luke warm air at best. I know it says in the directions that if I get the rad hoses switched up, it could effect BTU output by 25% I feel as though even at...
Mounted and rad hose is set. Now I'm looking to tie into power and would like to know where to do so. I positioned the heater to my left shoulder right above the wiring module behind cab, and inline with the harness that comes into the cab and supplies power to the lights and digital readout. I...
What year is the machine? 9K is a tad high for those hours I would think... Anyway, I had a good amount of welding done on my 753 with 1600hrs on it YESTERDAY. It was in rough shape, (demo machine with extensive breaker use) and I had a legitimate heavy equipment welding specialist come to my...
What is involved with reinstalling a right side drive motor into a bobcat 553. I am looking to pick a unit up on the cheap tomorrow and the issue at hand is that the original drive motor went bad, and the new one needs to be reinstalled. I've never tackled this specific issue before, so any info...
Thank you all. I really appreciate the input! Since the 463 will be my primary means of clearing pathways and sidewalks, I may grab a set of the thin width tires and wheels to make it clear 36". It will improve clearance and apparently traction too....
Ive had two 453's before i had the 463. It's basically the same machine except for more power. I do tree work in city and suburban locations so the 4 series machines are amazing in regard to hauling brush and logs/rounds out of tight back yards, and loading trucks feeding chipper etc. Yes the...