i was afraid that tracks would be the answer. i'm maxed out $ wise and can't afford the over the tire tracks. I guess this machine is another investment i got screwed on.
i have a 2005 jd 328 tire machine. i have new 14x17.5 tires on it, new engine, and new turbo. i am working on clearing my land and all was going well. now that i have dug into the bank and am into the softer sand i am having a problem with getting stuck. it seems like my belly pan is hitting...
i bought a JD 328 in April. after many problems i just got it back from deere after putting a new engine in it. I finally got to get into the work lights which do not work. I thought it was the bulb so i bought a brand new bulb and lens. I turn the key on and rock the switch up and no light. i...
tazza, the mechanic said that the injectors are under the valve covers. I guess the 328 has a different engine than the other 320 series. i've only put about 5 hrs on it since i got it two months ago, but the outfit prior to me probably was running in like this for a while. mechanic said the...
Well they came and fixed it today. It was the safety switch on the back of my axuilary hydraulics was bad. Them the mechanic told me that I have a bad injector. And they have to rip the engine apart to fix it. This is getting ridiculous
i bought a 2005 jd 328 two months ago. ever since i bought it when i start it up it would rev up and then go back down to an idle. some times it would start for half a second and then stall and you would have to hold the starter past it stalling and then it would start and rev up and then stay...
I am not sure if the 12x16.5 were stock.. the foam filled tires don't seem to go to well in sand so i don't think recapping them would be beneficial. does anyone know the cheapest place to buy 10x17.5 rims.????????????????????????
as you may have figure by my last 5 posts. i just bought a 2005 JD 328, and don't know to much about skid steers. currently it has 14x17.5 foam filled tires which are pretty much bald, they seem very wide to me. I have to replace the tires and are not filling them with foam. I was looking at...
My plan is to rebuild the bucket, but first have to separate them without damaging the hitch coupling plate. some welds are 1/4 thick. this is going to be fun.
I just purchased a 2005 JD 328. When I got it home i went to go take the bucket off to find out that the previous owner welded the bucket to the mounting plate. After further investigation it looks like the part of the bucket which the plate slides under on the top broke so they just decided to...
okay so here is my scenario. I went to go pick up a 2005 JD 328 skid steer from a used machinery dealer. everything worked fine. I went back a week later with a trailer to pay and pick it up. I payed the man and started putting it on the trailer when hydraulic started to pour out of the belly...