Recent content by CraigClayton

Your machine is about the same weight as my new holland L125 at 2150LBS. As i just purchased it I have not yet trailed it. I have a 3500 LBS single trailer 4x6 ft 6" built like a army ammo trailer and a 3500lbs single 5x11 that I did move my 2400 LBS Kubota on with an attached implement. Neither...

I just bought a used New Holland L125 for doing landscaping on my property. I do not have aux. hydraulics so I am using the manure bucket as my forestry bucket. I am going to put a small mesh barrier on the bucket to keep the branches out of the cab. I pushed all the branches in a large pile...

Twenty years ago I bought a Woods 5 ft rotary mower with bad bearings and 1/4 of the welds with stress cracks. I replaced the bearings and repaired all the stress cracks with 1/8 " 6013 welding rods on AC . The 6013 is a shallow penetration rod and is very good on sheet metal. The swinging...

To10fU I just remembered that you need to slide a 1 1/4 fence galvanized top rail through the bottom sleeve of the end wall. If not it will flap like a mad beast all winter. File the ends very smooth with a single wrap of duct tape so you do not ripe the fabric. Fasten the rail with strong cord...

To 1ofU I have put up a total of 4 Shelterlogic shelters. Two are 13Wx20Lx12H,one 10Wx17L,and one 12Wx20L. The first two are listed as SUV or barn shaped and they shed snow very well. The second one is gable end like you have in your picture. The third is a round top and this is the first winter...

I am not sure if my picture will show up in the User Question form but it is now in my Profile. I followed the advice as suggested by SkidRoe except I just cropped the photo to make it a 80x60 and it worked. I also requested that the space in my name to be removed as suggested again by SkidRoe...

I finally was able to add info to my Profile. I followed the advice suggested by SkidRoe in that I added 1 line at a time. On the first attempt I was able to add the line that my location was Uxbridge. So I then went and checked on my Profile and the location of Uxbridge was present BUT THE...

As one of the newest members I applied to join and I put all the info in the fields that appeared on the registration box. After the Top Secret scan I was sent the pass code that got me started. I have tried several times to add more info about myself and my intended use of my machine. I typed...

As I stated above I finally bought a NH L125 with 500 Hrs on the clock. I have been trolling for many years on the AGDEALER to find a Barn Cleaner size of machine. My first almost machine I owned was at a auction sale when my good neighbor pushed me to the front row to get my mouth flapping as...