Recent content by Audiman

I'm dealing on a CAT 236B, I have always had Bobcats but thought I would try a CAT since I have a broken ankle. Here are the details it is a 2006 model with 3800 hours it has CAB, HEAT, AIR CONDITIONING, HYDRAULIC COUPLER 2 SPEED, SUSPENSION SEAT, SELF-LEVELING, LIGHTS, its in pretty good...

I'm getting a low oil pressure warning on my machine. Changed the oil and filter and had the same problem. Removed the filter and there was no oil in the filter. My book says check the oil galley to see if plugged, the oil strainer to see if it is plugged, relief valve is stuck, or broken relief...

The machine seems to be stalling out when I'm driving and I push both levers forward fast to speed up like it is getting to much fuel, air, or not enough fuel. I'm wondering if the fuel injectors need cleaning or replaced.

It is a turbo charged machine. Oil looks good, coolant looks good also. Don't see any restriction on the lines. I took off the hose that goes to the turbo and there is some oil sitting in the hose.

Just purchased a 04 Bobcat S185 because it was a great deal but have a few issues to take care of. When I purchased the machine the primer bulb was broke, I think it got pinched in the door and the plastic end was broke off going into the bulb. I got a new primer bulb and when I pump it up it...

I need to find a parts and service manual for my 2004 bobcat S185. Does anyone know where I can download this. Thanks

I changed all the fuilds and filter when I got the machine. It is a 2005 and it has 8700 Hours on it. It is a one owner machine I bought from a farmer. I will check the compression. Thanks for the input

Help Bobcat S185 dies, stalls pushing loads I need some help figuring out what to do with my S185 It is a high hour machine and when I push a heavy loads Like a dirt pile the wheels won't even spin in the sand, the motor just Bogs and wants to stall until I back off on the controls. I have had...

I'm looking for a set of Goodyear Trackman OTT Rubber Tracks and Tires for a S185, S160, 773, 763 or any other machine that has a 40.6" wheel base. Let me know if you have a set that you would like to sell. Thanks

I have only used the machine for about 1 hour and thats been over a two week time span, so maybe I just need to give it a work out. Where and when is the proper place to look for the foam. Is there a way to check the system for air leaks. No oil leaks that I can find and the lift and tilt work...

Need some help, I just picked up a 02 S-185 with 2440 hrs on it and it has a very loud whine when going to turn left or right. Moving straight forward and backward it is quiet. I sold an 01 773gt before this and it was quiet so I was expecting the same. I noticed that there is an air bubble in...

Steve, I will take the lift arm safety support if you still have it. Thanks